Original file

Audi A3 Bosch EDC17C64 04L906021HM / 04L906021HM

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A3, hardware number 04L906021HM and software number 04L906021HM, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A32.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021HM
Software number
04L906021HM
Bosch part / software
10SW022393
Vehicle maker's hardware number
04L907309S

Technical data

Vehicle
BrandAudi
Car modelA3
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021HM
Software number04L906021HM
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2d14b75c257f0a51
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW022393Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309SOffset in the file: 0x332316
Software / calibration04L906021HM · version 4788Offset in the file: 0x332330
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DB84V///Offset in the file: 0x046FE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021HM and software number 04L906021HM. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021HL04L906021HLVolkswagen pcmflash
04L906021HL1037541507Volkswagen Golf
04L906021HL10SW018710Volkswagen pcmflash
04L906021HL10SW022394Volkswagen
04L906021HM10SW018705Volkswagen pcmflash
04L906021HM10SW022393Volkswagen pcmflash
04L906021M1037529016Volkswagen pcmflash
04L906021M1037533833Seat Leon CR 2013 Turbo

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page