Original file

Seat Leon CR 2013 Turbo Bosch EDC17C64 04L906021M / 1037533833

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Seat Leon CR 2013 Turbo, hardware number 04L906021M and software number 1037533833, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Leon CR 2013 Turbo1.6 diesel · 105.0PS / 77.2kW
Control unit
Bosch EDC17C64
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
04L906021M
Software number
1037533833
Vehicle maker's hardware number
04L907309B

Technical data

Vehicle
BrandSeat
Car modelLeon CR 2013 Turbo
Engine1.6 diesel
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021M
Software number1037533833
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameSeat Leon 1.6 TDI CR
File key1b1ae5594e6c88ca
Identification read from the file
ECU nameEDC17C64
Read typeOBD read (no boot area)
Bosch part / software1037533833Offset in the file: 0x18001A
Vehicle maker's hardware number04L907309BOffset in the file: 0x13699A
Software / calibration04L906021M · version 5517Offset in the file: 0x1369B4
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DA763///Offset in the file: 0x0847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021M and software number 1037533833. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021HM04L906021HMAudi A3
04L906021HM10SW018705Volkswagen pcmflash
04L906021HM10SW022393Volkswagen pcmflash
04L906021M1037529016Volkswagen pcmflash
04L906021M1037547737Audi pcmflash
04L906021N1037531315Audi pcmflash
04L906021N1037533832Audi pcmflash
04L906021N1037538356Seat Octavia 2 CR 2014

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page