Original file

Seat Octavia 2 CR 2014 Bosch EDC17C64 04L906021N / 1037538356

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Seat Octavia 2 CR 2014, hardware number 04L906021N and software number 1037538356, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Octavia 2 CR 20141.6 diesel · 105.0PS / 77.2kW
Control unit
Bosch EDC17C64
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
04L906021N
Software number
1037538356
Vehicle maker's hardware number
04L907309B

Technical data

Vehicle
BrandSeat
Car modelOctavia 2 CR 2014
Engine1.6 diesel
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021N
Software number1037538356
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameSkoda Octavia 1.6 TDI CR
File keyfa491b21e4958f50
Identification read from the file
ECU nameEDC17C64
Read typeOBD read (no boot area)
Bosch part / software1037538356Offset in the file: 0x18001A
Vehicle maker's hardware number04L907309BOffset in the file: 0x13CBDA
Software / calibration04L906021N · version 6547Offset in the file: 0x13CBF4
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DA76S///Offset in the file: 0x0847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021N and software number 1037538356. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021M1037533833Seat Leon CR 2013 Turbo
04L906021M1037547737Audi pcmflash
04L906021N1037531315Audi pcmflash
04L906021N1037533832Audi pcmflash
04L906021P04L907309BVolkswagen pcmflash
04L906021P1037531316Škoda Octavia 3
04L906021P1037533835Volkswagen pcmflash
04L906021P1037538354Škoda Octavia 3, Škoda pcmflash, Volkswagen

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page