Original file

Audi Q3 Bosch EDC17C64 04L907309AB / 010762

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi Q3, hardware number 04L907309AB and software number 010762, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel 88KW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L907309AB
Software number
010762
Bosch part / software
10SW010762
Software / calibration
04L906016FE

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel 88KW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L907309AB
Software number010762
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file name206
File key46e3e73ddd3b1fab
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW010762Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309ABOffset in the file: 0x334DBE
Software / calibration04L906016FE · version 3335Offset in the file: 0x334DD8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8PA///Offset in the file: 0x047B98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L907309AB and software number 010762. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3 2.0 TDIFlash4,096.00 KB€15Add to cart

All reads of 04L907309AB / 010762

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L907309AB009924Audi Q3
04L907309AB009925Audi Q3 2.0 TDI, Audi Q3 2.0 TDI 184 pk CR DPF
04L907309AB009926Audi Q3 2.0 TDI
04L907309AB009927Audi Q3 2.0 TDI
04L907309AB010763Audi Q3, Audi Q3 2.0 TDI CR
04L907309AB010764Audi Q3 2.0 TDI CR, Audi Q3
04L907309AB040985Volkswagen Caddy 2.0 TDI
04L907309AB046685Volkswagen Caddy 2.0 TDI

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page