Original file

Volkswagen Sharan 2.0 TDI BlueMotion Bosch EDC17C64 04L907309AB / 10SW041037 P866G8Q5

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Volkswagen Sharan 2.0 TDI BlueMotion, hardware number 04L907309AB and software number 10SW041037 P866G8Q5, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Sharan 2.0 TDI BlueMotion2.0 diesel 116.0PS / 85.3kW
Control unit
Bosch EDC17C64
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
04L907309AB
Software number
10SW041037 P866G8Q5
Bosch part / software
10SW041037
Software / calibration
04L906016NS

Technical data

Vehicle
BrandVolkswagen
Car modelSharan 2.0 TDI BlueMotion
Engine2.0 diesel 116.0PS / 85.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L907309AB
Software number10SW041037 P866G8Q5
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1482e924afe252d1
Identification read from the file
ECU nameEDC17C64
Read typeOBD read (no boot area)
Bosch part / software10SW041037Offset in the file: 0x18001A
Vehicle maker's hardware number04L907309ABOffset in the file: 0x13B322
Software / calibration04L906016NS · version 6647Offset in the file: 0x13B33C
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8Q5///Offset in the file: 0x0847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L907309AB and software number 10SW041037 P866G8Q5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page