Original file

Škoda Yeti Bosch EDC17C64 04L907309K / 04L906016G

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Škoda Yeti, hardware number 04L907309K and software number 04L906016G, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel · 110.1PS / 81.0kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L907309K
Software number
04L906016G
Bosch part / software
10SW010075

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel
Power110.1PS / 81.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L907309K
Software number04L906016G
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key130a2b8b10faebd3
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW010075Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309KOffset in the file: 0x337756
Software / calibration04L906016G · version 3225Offset in the file: 0x337770
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8A7///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L907309K and software number 04L906016G. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L907309G10SW084469Volkswagen
04L907309K004859Škoda Yeti
04L907309K010069Škoda Yeti 2.0 TDI CR
04L907309K034077Volkswagen Jetta
04L907309K04L906016HŠkoda Yeti
04L907309K04L906016JŠkoda Yeti
04L907309K04L907309KVolkswagen Passat, Volkswagen Jetta
04L907309K1037533463Volkswagen Jetta, Volkswagen Yeti, Škoda

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page