Original file

Škoda Yeti Bosch EDC17C64 04L907309K / 1037554378

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Škoda Yeti, hardware number 04L907309K and software number 1037554378, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel · 110.0PS / 80.9kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L907309K
Software number
1037554378
Software / calibration
04L906016G

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel
Power110.0PS / 80.9kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L907309K
Software number1037554378
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file name6190
File key8bd78dd2fda70ad6
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037554378Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309KOffset in the file: 0x3372E6
Software / calibration04L906016G · version 1184Offset in the file: 0x337300
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8A4///Offset in the file: 0x047E40

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L907309K and software number 1037554378. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L907309K04L907309KVolkswagen Passat, Volkswagen Jetta
04L907309K1037533463Volkswagen Jetta, Volkswagen Yeti, Škoda
04L907309K1037546910Volkswagen Passat 2.0 TDI
04L907309K1037554377Škoda Yeti
04L907309K1037554379Škoda Yeti 2.0 TDI
04L907309K1037554380Škoda Yeti 2.0 TDI, Škoda Yeti
04L907309K1037554381Škoda Yeti 2.0 TDI CR
04L907309K10SW004852

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page