Original file

Audi A4 Bosch EDC17C64 04L997022A / 10SW013728

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A4, hardware number 04L997022A and software number 10SW013728, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 190PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L997022A
Software number
10SW013728
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 190PS
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L997022A
Software number10SW013728
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key219f41ddae788e99
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW013728Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L997022A · version 3913Offset in the file: 0x3345EA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7Q0///Offset in the file: 0x04AEEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L997022A and software number 10SW013728. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L997021H10SW010639Audi pcmflash, Audi A4
04L997021H10SW013729Audi pcmflash, Audi A5, Audi A4
04L997022A04L907309Audi A4
04L997022A10SW010640Audi A4
04L997022M034078Volkswagen Golf
04L997022M10SW034078Volkswagen Golf
04L997022N034079Volkswagen Golf 2.0 TDI CR
04L997022N04L907309Volkswagen Golf 7

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page