Original file

Mercedes-Benz Vito Bosch EDC17C66 0000000227 / 1037540848

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0000000227 and software number 1037540848, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vitodiesel 163PS
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0000000227
Software number
1037540848
Bosch part / software
10SW035973
Software / calibration
6519022703

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Enginediesel 163PS
Displacement2.2
Power163PS / 119.9kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0000000227
Software number1037540848
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycbbf6dd99f58d770
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW035973Offset in the file: 0x02001A
Software / calibration6519022703Offset in the file: 0x02022F
Data set number6519035553Offset in the file: 0x2893E2
Boot software6519041400Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS1__CV180500///Offset in the file: 0x06289C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0000000227 and software number 1037540848. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash4,096.00 KB€15Add to cart
Mercedes-Benz VFlash4,096.00 KB€15Add to cart
Mercedes-Benz VitoFlash4,096.00 KB€15Add to cart

All reads of 0000000227 / 1037540848

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
10SW064019Mercedes-Benz Sprinter219/319/419/519
10SW072980Mercedes-Benz VITO
10SW072982Mercedes-Benz VITO
10SW072983Mercedes-Benz Vito
00000002271037541778Mercedes-Benz
000633126210SW000633126246V0Mercedes-Benz Vito
00323412621037533497Mercedes-Benz C180
00355412621037541778Mercedes-Benz VITO XFX !!!!!!, Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page