Original file

Mercedes-Benz Vito Bosch EDC17C66 0006331262 / 10SW000633126246V0

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0006331262 and software number 10SW000633126246V0, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito2.2 84KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0006331262
Software number
10SW000633126246V0
Bosch part / software
10SW000633
Software / calibration
6229020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine2.2 84KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0006331262
Software number10SW000633126246V0
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb242789ac96bdaac
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW000633Offset in the file: 0x02001A
Software / calibration6229020800Offset in the file: 0x0B8A05
Data set number6229034200Offset in the file: 0x0B8A10
Boot software6229040100Offset in the file: 0x0B89FA
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46V0__CV144700///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0006331262 and software number 10SW000633126246V0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
10SW072982Mercedes-Benz VITO
10SW072983Mercedes-Benz Vito
00000002271037540848Mercedes-Benz Vito, Mercedes-Benz V
00000002271037541778Mercedes-Benz
00323412621037533497Mercedes-Benz C180
00355412621037541778Mercedes-Benz VITO XFX !!!!!!, Mercedes-Benz Vito
003554126210SW003554126246V0Mercedes-Benz Vito
00997612621037533497Mercedes-Benz C180, Mercedes-Benz C180d

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page