Original file

Mercedes-Benz C180d Bosch EDC17C66 0099761262 / 1037533497

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C180d, hardware number 0099761262 and software number 1037533497, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C180d1.6 115PS
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0099761262
Software number
1037533497
Bosch part / software
10SW009976
Software / calibration
6269020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelC180d
Engine1.6 115PS
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0099761262
Software number1037533497
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycef8d64f2c25383c
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW009976Offset in the file: 0x02001A
Software / calibration6269020800Offset in the file: 0x02022F
Data set number6269031301Offset in the file: 0x2B908C
Boot software6269040000Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46R0__CV160500///Offset in the file: 0x036FFC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0099761262 and software number 1037533497. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz C180Flash4,096.00 KB€15Add to cart

All reads of 0099761262 / 1037533497

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
000633126210SW000633126246V0Mercedes-Benz Vito
00323412621037533497Mercedes-Benz C180
00355412621037541778Mercedes-Benz VITO XFX !!!!!!, Mercedes-Benz Vito
003554126210SW003554126246V0Mercedes-Benz Vito
009987126210SW009987126246R0Mercedes-Benz C200
01022012621037541778Mercedes-Benz Vito
0115741262011574Mercedes-Benz Vito
011574126210SW011574126260V1Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page