Original file

Mercedes-Benz Vito Bosch EDC17C66 0115741262 / 011574

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0115741262 and software number 011574, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.6 diesel 84KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0115741262
Software number
011574
Bosch part / software
10SW011574
Software / calibration
6229020900

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.6 diesel 84KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0115741262
Software number011574
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key59ab67c5fb1c3402
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW011574Offset in the file: 0x22001A
Software / calibration6229020900Offset in the file: 0x2B8AF1
Data set number6229036600Offset in the file: 0x2B8AFC
Boot software6229040100Offset in the file: 0x2B8AE6
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800///Offset in the file: 0x2213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0115741262 and software number 011574. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
003554126210SW003554126246V0Mercedes-Benz Vito
00997612621037533497Mercedes-Benz C180, Mercedes-Benz C180d
009987126210SW009987126246R0Mercedes-Benz C200
01022012621037541778Mercedes-Benz Vito
011574126210SW011574126260V1Mercedes-Benz Vito
02651903181037540848Mercedes-Benz V-Klasse
02651903201037540848Mercedes-Benz V-Klasse
02651903241037540848Mercedes-Benz V-Klasse

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page