Original file

Mercedes-Benz C200 Bosch EDC17C66 0281030192 / 1037554157

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C200, hardware number 0281030192 and software number 1037554157, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2001.6 100KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281030192
Software number
1037554157
Software / calibration
6269020600

Technical data

Vehicle
BrandMercedes-Benz
Car modelC200
Engine1.6 100KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281030192
Software number1037554157
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2efc1672241e69f4
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037554157Offset in the file: 0x02001A
Software / calibration6269020600Offset in the file: 0x0B8D09
Data set number6269035700Offset in the file: 0x0B8D14
Boot software6269040000Offset in the file: 0x0B8CFE
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_45R0__CV142800///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030192 and software number 1037554157. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
027623126210SW027623126246R0Mercedes-Benz C200d
027632126210SW027632126246R0Mercedes-Benz C200d
02810199861037544321Mercedes-Benz V
02810301921037533497Mercedes-Benz C180 CDI, Mercedes-Benz C180d
02810301921037554733Mercedes-Benz C200
028103019210SW009984Mercedes-Benz C180
028103019210SW009985Mercedes-Benz C180D
02810312441037540848Mercedes-Benz V250, Mercedes-Benz Viano, Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page