Original file

Mercedes-Benz C180 Bosch EDC17C66 0281030192 / 10SW009984

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C180, hardware number 0281030192 and software number 10SW009984, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C1801.6 85KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281030192
Software number
10SW009984
Software / calibration
6269020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelC180
Engine1.6 85KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281030192
Software number10SW009984
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key65c12987426f7afd
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW009984Offset in the file: 0x02001A
Software / calibration6269020800Offset in the file: 0x0B9081
Data set number6269038400Offset in the file: 0x0B908C
Boot software6269040000Offset in the file: 0x0B9076
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46R0__CV160500///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281030192 and software number 10SW009984. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
02810199861037544321Mercedes-Benz V
02810301921037533497Mercedes-Benz C180 CDI, Mercedes-Benz C180d
02810301921037554157Mercedes-Benz C200
02810301921037554733Mercedes-Benz C200
028103019210SW009985Mercedes-Benz C180D
02810312441037540848Mercedes-Benz V250, Mercedes-Benz Viano, Mercedes-Benz Vito
02810312441037555863Mercedes-Benz Vito
028103124410SW004632Mercedes-Benz Vito 114

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page