Original file

Mercedes-Benz Vito Bosch EDC17C66 0281031326 / 1037541778

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0281031326 and software number 1037541778, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.6 84KW
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031326
Software number
1037541778
Bosch part / software
10SW010220
Software / calibration
6229020900

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.6 84KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281031326
Software number1037541778
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2e4cd4b2318f9a0c
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW010220Offset in the file: 0x02001A
Software / calibration6229020900Offset in the file: 0x02022F
Data set number6229039000Offset in the file: 0x2B8AFC
Boot software6229040100Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800///Offset in the file: 0x040D5C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031326 and software number 1037541778. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
028103124410SW010200Mercedes-Benz Vito
028103124410SW010205Mercedes-Benz V 220CDI
028103124410SW012290Mercedes-Benz Vito
028103124410SW022233Mercedes-Benz V-220CDI
02810313261037554966Mercedes-Benz Vito
04180312621037541778Mercedes-Benz Vito
041804126210SW041804126266V1Mercedes-Benz Vito
041806126210SW041806Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page