Original file

Mercedes-Benz Vito Bosch EDC17C66 0281031326 / 1037554966

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0281031326 and software number 1037554966, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito65KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
0281031326
Software number
1037554966
Software / calibration
6229020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine65KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0281031326
Software number1037554966
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameMercedes Vito 65KW C1
File keyb0e28782b828162f
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037554966Offset in the file: 0x22001A
Software / calibration6229020800Offset in the file: 0x2B8A05
Data set number6229034400Offset in the file: 0x2B8A10
Boot software6229040100Offset in the file: 0x2B89FA
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46V0__CV144700///Offset in the file: 0x2213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031326 and software number 1037554966. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
028103124410SW010205Mercedes-Benz V 220CDI
028103124410SW012290Mercedes-Benz Vito
028103124410SW022233Mercedes-Benz V-220CDI
02810313261037541778Mercedes-Benz Vito
04180312621037541778Mercedes-Benz Vito
041804126210SW041804126266V1Mercedes-Benz Vito
041806126210SW041806Mercedes-Benz Vito
041808126210SW041808126266V1Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page