Original file

Mercedes-Benz Vito Bosch EDC17C66 0418081262 / 10SW041808126266V1

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0418081262 and software number 10SW041808126266V1, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.6 diesel 65KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0418081262
Software number
10SW041808126266V1
Bosch part / software
10SW041808
Software / calibration
6229021200

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.6 diesel 65KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0418081262
Software number10SW041808126266V1
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc02400a0d04b968c
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW041808Offset in the file: 0x02001A
Software / calibration6229021200Offset in the file: 0x0B93A3
Data set number6229031701Offset in the file: 0x0B93AE
Boot software6229040100Offset in the file: 0x0B9398
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_66V1__CV182500///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0418081262 and software number 10SW041808126266V1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart

All reads of 0418081262 / 10SW041808126266V1

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
02810313261037554966Mercedes-Benz Vito
04180312621037541778Mercedes-Benz Vito
041804126210SW041804126266V1Mercedes-Benz Vito
041806126210SW041806Mercedes-Benz Vito
041810126210SW041810126266V1Mercedes-Benz Vito
045791126210SW045791126248R2Mercedes-Benz C180
04579912621037533497Mercedes-Benz C180 CDI
045799126210SW045799126248R2Mercedes-Benz C180d

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page