Original file

Mercedes-Benz C180 Bosch EDC17C66 0457911262 / 10SW045791126248R2

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C180, hardware number 0457911262 and software number 10SW045791126248R2, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C1801.6 85KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0457911262
Software number
10SW045791126248R2
Bosch part / software
10SW045791
Software / calibration
6269021000

Technical data

Vehicle
BrandMercedes-Benz
Car modelC180
Engine1.6 85KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0457911262
Software number10SW045791126248R2
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5dc03e1a2addfe26
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW045791Offset in the file: 0x02001A
Software / calibration6269021000Offset in the file: 0x0B9B89
Data set number6269032401Offset in the file: 0x0B9B94
Boot software6269040000Offset in the file: 0x0B9B7E
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_48R2__CV184400///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0457911262 and software number 10SW045791126248R2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
041804126210SW041804126266V1Mercedes-Benz Vito
041806126210SW041806Mercedes-Benz Vito
041808126210SW041808126266V1Mercedes-Benz Vito
041810126210SW041810126266V1Mercedes-Benz Vito
04579912621037533497Mercedes-Benz C180 CDI
045799126210SW045799126248R2Mercedes-Benz C180d
045801126210SW045801126248R2Mercedes-Benz C200
045804126210SW045804126248R2Mercedes-Benz C200

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page