Original file

Mercedes-Benz C180 CDI Bosch EDC17C66 0457991262 / 1037533497

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C180 CDI, hardware number 0457991262 and software number 1037533497, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C180 CDI1.6 diesel 100KW
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0457991262
Software number
1037533497
Bosch part / software
10SW045811
Software / calibration
6269021000

Technical data

Vehicle
BrandMercedes-Benz
Car modelC180 CDI
Engine1.6 diesel 100KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0457991262
Software number1037533497
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6e4ae00e6aa88f91
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW045811Offset in the file: 0x02001A
Software / calibration6269021000Offset in the file: 0x02022F
Data set number6269032601Offset in the file: 0x2B9B94
Boot software6269040000Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_48R2__CV184400///Offset in the file: 0x036FF8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0457991262 and software number 1037533497. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
041806126210SW041806Mercedes-Benz Vito
041808126210SW041808126266V1Mercedes-Benz Vito
041810126210SW041810126266V1Mercedes-Benz Vito
045791126210SW045791126248R2Mercedes-Benz C180
045799126210SW045799126248R2Mercedes-Benz C180d
045801126210SW045801126248R2Mercedes-Benz C200
045804126210SW045804126248R2Mercedes-Benz C200
045807126210SW045807126248R2Mercedes-Benz C200

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page