Original file

Mercedes-Benz C200 Bosch EDC17C66 0458071262 / 10SW045807126248R2

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C200, hardware number 0458071262 and software number 10SW045807126248R2, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2001.6 100KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
0458071262
Software number
10SW045807126248R2
Bosch part / software
10SW045807
Software / calibration
6269021000

Technical data

Vehicle
BrandMercedes-Benz
Car modelC200
Engine1.6 100KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0458071262
Software number10SW045807126248R2
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key2208c78daccaf2c1
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW045807Offset in the file: 0x00001A
Software / calibration6269021000Offset in the file: 0x099B89
Data set number6269033101Offset in the file: 0x099B94
Boot software6269040000Offset in the file: 0x099B7E
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_48R2__CV184400///Offset in the file: 0x0013A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0458071262 and software number 10SW045807126248R2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-BenzFlash2,048.00 KB€15Add to cart

All reads of 0458071262 / 10SW045807126248R2

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
04579912621037533497Mercedes-Benz C180 CDI
045799126210SW045799126248R2Mercedes-Benz C180d
045801126210SW045801126248R2Mercedes-Benz C200
045804126210SW045804126248R2Mercedes-Benz C200
045808126210SW045808126248R2Mercedes-Benz C180d
045810126210SW045810126248R2Mercedes-Benz C180
045811126210SW045811126248R2Mercedes-Benz C200d
045812126210SW045812126248R2Mercedes-Benz C200

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page