Original file

Mercedes-Benz C200d Bosch EDC17C66 0458111262 / 10SW045811126248R2

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C200d, hardware number 0458111262 and software number 10SW045811126248R2, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C200d1.6 100KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0458111262
Software number
10SW045811126248R2
Bosch part / software
10SW045811
Software / calibration
6269021000

Technical data

Vehicle
BrandMercedes-Benz
Car modelC200d
Engine1.6 100KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0458111262
Software number10SW045811126248R2
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd9acd1ae9f7ab6b5
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW045811Offset in the file: 0x02001A
Software / calibration6269021000Offset in the file: 0x0B9B89
Data set number6269033401Offset in the file: 0x0B9B94
Boot software6269040000Offset in the file: 0x0B9B7E
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_48R2__CV184400///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0458111262 and software number 10SW045811126248R2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
045804126210SW045804126248R2Mercedes-Benz C200
045807126210SW045807126248R2Mercedes-Benz C200
045808126210SW045808126248R2Mercedes-Benz C180d
045810126210SW045810126248R2Mercedes-Benz C180
045812126210SW045812126248R2Mercedes-Benz C200
052322126210SW052322126266V1Mercedes-Benz Vito
052325126210SW052325126266V1Mercedes-Benz Vito
052333126210SW052333126266V1Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page