Original file

Mercedes-Benz Vito Bosch EDC17C66 0523221262 / 10SW052322126266V1

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number 0523221262 and software number 10SW052322126266V1, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.6 65KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
0523221262
Software number
10SW052322126266V1
Bosch part / software
10SW052322
Software / calibration
6229021200

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.6 65KW
FuelDiesel
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number0523221262
Software number10SW052322126266V1
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key9e18944874bf5e5b
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW052322Offset in the file: 0x00001A
Software / calibration6229021200Offset in the file: 0x0993A3
Data set number6229032101Offset in the file: 0x0993AE
Boot software6229040100Offset in the file: 0x099398
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_66V1__CV182500///Offset in the file: 0x0013A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0523221262 and software number 10SW052322126266V1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
045808126210SW045808126248R2Mercedes-Benz C180d
045810126210SW045810126248R2Mercedes-Benz C180
045811126210SW045811126248R2Mercedes-Benz C200d
045812126210SW045812126248R2Mercedes-Benz C200
052325126210SW052325126266V1Mercedes-Benz Vito
052333126210SW052333126266V1Mercedes-Benz Vito
10SW010220126260V11037541778Mercedes-Benz Vito 111 CDI
62290205001037541778Mercedes-Benz Vito 111 CDI

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page