Original file
Mercedes-Benz Vito Bosch EDC17C66 10SW004621
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, software number 10SW004621, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vito
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Software number
- 10SW004621
- Software / calibration
- 6519021802
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Vito |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW004621 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | Mercedes Vito 4X4 140 |
| File key | 354bf7a5fbaccd50 |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW004621 | Offset in the file: 0x22001A |
| Software / calibration | 6519021802 | Offset in the file: 0x2850C7 |
| Data set number | 6519033539 | Offset in the file: 0x2850D2 |
| Boot software | 6519041400 | Offset in the file: 0x2850BC |
| Bosch project identifier (EPK) | 45/1/EDC17C66/1/P695//P_695_FGS1__CV150900/// | Offset in the file: 0x220C80 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW004621. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| 1037540848 | Mercedes-Benz V-Klasse, Mercedes-Benz Vito, Mercedes-Benz Vito GERARD | |
| 1037550445 | Mercedes-Benz V Classe | |
| 1037555862 | Mercedes-Benz VITO | |
| 1037555865 | Mercedes-Benz VITO | |
| 10SW004628 | Mercedes-Benz V-Klasse | |
| 10SW008531 | Mercedes-Benz VITO | |
| 10SW010203 | Mercedes-Benz VITO114cdi | |
| 10SW011785 | Mercedes-Benz VITO |