Original file

Mercedes-Benz VITO114cdi Bosch EDC17C66 10SW010203

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz VITO114cdi, software number 10SW010203, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITO114cdi2.1 diesel 136PS
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW010203
Software / calibration
6519023602

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO114cdi
Engine2.1 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Software number10SW010203
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf4d7de876bb66b44
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW010203Offset in the file: 0x02001A
Software / calibration6519023602Offset in the file: 0x085943
Data set number6519032534Offset in the file: 0x08594E
Boot software6519041400Offset in the file: 0x085938
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FHS0__CV152500///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW010203. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
1037555865Mercedes-Benz VITO
10SW004621Mercedes-Benz Vito
10SW004628Mercedes-Benz V-Klasse
10SW008531Mercedes-Benz VITO
10SW011785Mercedes-Benz VITO
10SW012287Mercedes-Benz V
10SW016882Mercedes-Benz Vito
10SW016886Mercedes-Benz

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page