Original file

Mercedes-Benz Vito Bosch EDC17C66 10SW022236

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, software number 10SW022236, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito2.2 diesel 190PS
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW022236
Software / calibration
6519021802

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine2.2 diesel 190PS
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Software number10SW022236
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key52fceadc2c0b2e83
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW022236Offset in the file: 0x02001A
Software / calibration6519021802Offset in the file: 0x0850C7
Data set number6519036250Offset in the file: 0x0850D2
Boot software6519041400Offset in the file: 0x0850BC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FGS1__CV150900///Offset in the file: 0x020C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW022236. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
10SW011785Mercedes-Benz VITO
10SW012287Mercedes-Benz V
10SW016882Mercedes-Benz Vito
10SW016886Mercedes-Benz
10SW022244Mercedes-Benz V-Klasse
10SW032214Mercedes-Benz Vito
10SW033060Mercedes-Benz V
10SW035973Mercedes-Benz Vito, Mercedes-Benz 2013y 200CDI

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page