Original file

Mercedes-Benz Vito Bosch EDC17C66 10SW037892

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, software number 10SW037892, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vitodiesel · 162.4PS / 119.4kW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW037892
Software / calibration
6519022703

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Enginediesel
Displacement2.1
Power162.4PS / 119.4kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Software number10SW037892
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6cf1f43c318c2dde
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW037892Offset in the file: 0x02001A
Software / calibration6519022703Offset in the file: 0x0893D7
Data set number6519035553Offset in the file: 0x0893E2
Boot software6519041400Offset in the file: 0x0893CC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS1__CV180500///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW037892. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
10SW032214Mercedes-Benz Vito
10SW033060Mercedes-Benz V
10SW035973Mercedes-Benz Vito, Mercedes-Benz 2013y 200CDI
10SW035978Mercedes-Benz V
10SW038271Mercedes-Benz V-Klasse
10SW042156Mercedes-Benz Vito
10SW042158Mercedes-Benz V
10SW042162Mercedes-Benz V-Klasse

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page