Original file

Mercedes-Benz Vito 109 CDI Bosch EDC17C66 6229021200 / 10SW052329 126266V1

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito 109 CDI, hardware number 6229021200 and software number 10SW052329 126266V1, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito 109 CDIdiesel 88.0PS / 64.7kW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6229021200
Software number
10SW052329 126266V1
Bosch part / software
10SW052329

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito 109 CDI
Enginediesel 88.0PS / 64.7kW
Displacement1.6
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number6229021200
Software number10SW052329 126266V1
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key21f32b02454325da
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW052329Offset in the file: 0x22001A
Software / calibration6229021200Offset in the file: 0x2B93A3
Data set number6229032501Offset in the file: 0x2B93AE
Boot software6229040100Offset in the file: 0x2B9398
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_66V1__CV182500///Offset in the file: 0x2213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6229021200 and software number 10SW052329 126266V1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
62290210001037541778Mercedes-Benz Vito 111 CDI
62290212001037541778Mercedes-Benz Vito 111 CDI
622902120010SW052322 126266V1Mercedes-Benz Vito 109 CDI (1.6)
622902120010SW052325 126266V1Mercedes-Benz Vito 111 CDI (1.6)
62290401001037554966Mercedes-Benz VITO109 1.6 CDi
62290401006229021200Mercedes-Benz VITO111
62690100001037533497Mercedes-Benz C 180d
62690206001037533497Mercedes-Benz C 200 d

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page