Original file

Mercedes-Benz VITO119 Bosch EDC17C66 6519012802 / 6519033239

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz VITO119, hardware number 6519012802 and software number 6519033239, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITO119diesel 190.3PS / 140.0kW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
6519012802
Software number
6519033239
Bosch part / software
10SW004618
Software / calibration
6519021802

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO119
Enginediesel 190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number6519012802
Software number6519033239
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key45d3a85e9eb0f170
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW004618Offset in the file: 0x22001A
Software / calibration6519021802Offset in the file: 0x2850C7
Data set number6519033239Offset in the file: 0x2850D2
Boot software6519041400Offset in the file: 0x2850BC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FGS1__CV150900///Offset in the file: 0x220C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519012802 and software number 6519033239. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
626904000010SW045799 126248R2Mercedes-Benz C 200 d
626904000010SW045801 126248R2Mercedes-Benz C 180 d
65190128021037540848Mercedes-Benz Vito 119 CDI
65190128026519022703Mercedes-Benz V200
65190128026519036662Mercedes-Benz VITO119
65190143011037540848Mercedes-Benz Vito 119 CDI
65190202021037540848Mercedes-Benz Vito 116 CDI
65190206021037540848Mercedes-Benz Vito 116 CDI

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page