Original file

Mercedes-Benz V 250 D Bosch EDC17C66 6519020703 / 1037540848

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz V 250 D, hardware number 6519020703 and software number 1037540848, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V 250 Ddiesel 190PS
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
6519020703
Software number
1037540848
Bosch part / software
10SW032214

Technical data

Vehicle
BrandMercedes-Benz
Car modelV 250 D
Enginediesel 190PS
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number6519020703
Software number1037540848
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keybe3527852caf7320
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW032214Offset in the file: 0x02001A
Software / calibration6519020703Offset in the file: 0x02022F
Data set number6519038547Offset in the file: 0x2893E2
Boot software6519041400Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS0__CV172300///Offset in the file: 0x062894

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519020703 and software number 1037540848. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
65190128026519036662Mercedes-Benz VITO119
65190143011037540848Mercedes-Benz Vito 119 CDI
65190202021037540848Mercedes-Benz Vito 116 CDI
65190206021037540848Mercedes-Benz Vito 116 CDI
65190218021037540848Mercedes-Benz Vito 114 CDI, Mercedes-Benz Vito 119 CDI, Mercedes-Benz Vito 116 CDI
65190227031037540848Mercedes-Benz Vito 119 CDI
651902270310SW034933 P695FKS1Mercedes-Benz Vito 119 CDI
651902270310SW035978 P695FKS1Mercedes-Benz Vito 119 CDI

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page