Original file

Mercedes-Benz Vito 119 CDI Bosch EDC17C66 6519041400 / 6519022703 - 6519035153

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito 119 CDI, hardware number 6519041400 and software number 6519022703 - 6519035153, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito 119 CDIdiesel 189.9PS / 139.7kW
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
6519041400
Software number
6519022703 - 6519035153
Bosch part / software
10SW035947
Software / calibration
6519022703

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito 119 CDI
Enginediesel 189.9PS / 139.7kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number6519041400
Software number6519022703 - 6519035153
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key3e5e72cb0286e654
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
Bosch part / software10SW035947Offset in the file: 0x0A001A
Software / calibration6519022703Offset in the file: 0x0293D7
Data set number6519035153Offset in the file: 0x0293E2
Boot software6519041400Offset in the file: 0x0293CC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS1__CV180500///Offset in the file: 0x0A1140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519041400 and software number 6519022703 - 6519035153. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
651904140010SW038271 P695FKS1Mercedes-Benz Vito 114 CDI
651904140010SW045986 P695FKS1Mercedes-Benz Vito 114 CDI
651904140010SW072980 P695FKS1Mercedes-Benz Vito 116 CDI
65190414006519012802 - 6519022703 - 6519033556Mercedes-Benz Vito 116 CDI
65190414006519033055Mercedes-Benz VITO200/220 2.2 CDI R4
65190414006519036962Mercedes-Benz VITO110 2. R4
A44726003001037541778Mercedes-Benz Vito 1.6L
CR41-622-40V1-447X-85KW-1BSL2V1-EU5OPR-C1-EF-147Mercedes-Benz A180

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page