Original file

Mercedes-Benz VITO200/220 2.2 CDI R4 Bosch EDC17C66 6519041400 / 6519033055

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz VITO200/220 2.2 CDI R4, hardware number 6519041400 and software number 6519033055, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITO200/220 2.2 CDI R42.2 diesel 163.2PS / 120.0kW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
6519041400
Software number
6519033055
Bosch part / software
10SW038272
Software / calibration
6519022703

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO200/220 2.2 CDI R4
Engine2.2 diesel 163.2PS / 120.0kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware number6519041400
Software number6519033055
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf2a0e21b4bdef4d9
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW038272Offset in the file: 0x04001A
Software / calibration6519022703Offset in the file: 0x0A93D7
Data set number6519033055Offset in the file: 0x0A93E2
Boot software6519041400Offset in the file: 0x0A93CC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS1__CV180500///Offset in the file: 0x041140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519041400 and software number 6519033055. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
651904140010SW045986 P695FKS1Mercedes-Benz Vito 114 CDI
651904140010SW072980 P695FKS1Mercedes-Benz Vito 116 CDI
65190414006519012802 - 6519022703 - 6519033556Mercedes-Benz Vito 116 CDI
65190414006519022703 - 6519035153Mercedes-Benz Vito 119 CDI
65190414006519036962Mercedes-Benz VITO110 2. R4
A44726003001037541778Mercedes-Benz Vito 1.6L
CR41-622-40V1-447X-85KW-1BSL2V1-EU5OPR-C1-EF-147Mercedes-Benz A180
CR41-622-45V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260031037541778Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page