Original file
Mercedes-Benz Vito Bosch EDC17C66 CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 / 1037548753
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 and software number 1037548753, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vito1.6 diesel 84KW
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003
- Software number
- 1037548753
- Software / calibration
- 6229020500
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Vito |
| Engine | 1.6 diesel 84KW |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 |
| Software number | 1037548753 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | abbd5b69dd2f55e2 |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037548753 | Offset in the file: 0x02001A |
| Software / calibration | 6229020500 | Offset in the file: 0x0B8099 |
| Data set number | 6229032000 | Offset in the file: 0x0B80A4 |
| Boot software | 6229040100 | Offset in the file: 0x0B808E |
| Bosch project identifier (EPK) | 47/1/EDC17C66/1/P1262//P_1262_45V0__CV143100/// | Offset in the file: 0x0213A0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 and software number 1037548753. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| A4472600300 | 1037541778 | Mercedes-Benz Vito 1.6L |
| CR41-622-40V1-447X-85KW-1BSL2V1-EU5OPR-C1-EF-147 | Mercedes-Benz A180 | |
| CR41-622-45V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-45V0-447X-84KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-45V0_RC01-447X-84KW-2ASL4V1-EU6OPS-C1-GETRIEBEA447 | Mercedes-Benz Viano | |
| CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 | 1037541778 | Mercedes-Benz Vito, Mercedes-Benz VITO109 |
| CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 | 1037553626 | Mercedes-Benz Vito |
| CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA44726003 | 1037553627 | Mercedes-Benz Vito |