Original file

Mercedes-Benz VITO109 Bosch EDC17C66 CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 / 1037553627

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz VITO109, hardware number CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 and software number 1037553627, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITO1091.6 diesel 65KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030
Software number
1037553627
Software / calibration
6229020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO109
Engine1.6 diesel 65KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030
Software number1037553627
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9a6a05b4c3cce5de
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037553627Offset in the file: 0x02001A
Software / calibration6229020800Offset in the file: 0x0B8A05
Data set number6229033000Offset in the file: 0x0B8A10
Boot software6229040100Offset in the file: 0x0B89FA
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46V0__CV144700///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 and software number 1037553627. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page