Original file

Mercedes-Benz W447 Bosch EDC17C66 CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 / 1037554966

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz W447, hardware number CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 and software number 1037554966, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz W44765KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030
Software number
1037554966
Software / calibration
6229020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelW447
Engine65KW
FuelDiesel
Displacement1.6
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030
Software number1037554966
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb39f089f0ac2d6df
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037554966Offset in the file: 0x22001A
Software / calibration6229020800Offset in the file: 0x2B8A05
Data set number6229034400Offset in the file: 0x2B8A10
Boot software6229040100Offset in the file: 0x2B89FA
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46V0__CV144700///Offset in the file: 0x2213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 and software number 1037554966. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VITO109Flash896.00 KB€15Add to cart
Mercedes-Benz VITO109Flash2,048.00 KB€15Add to cart

All reads of CR41-622-46V0-447X-65KW-2ASL4V1-EU5OPR-C1-GETRIEBEA447260030 / 1037554966

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page