Original file
Mercedes-Benz Vito Bosch EDC17C66 CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19 / 10SW073978
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19 and software number 10SW073978, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vito1.6 diesel 88PS
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19
- Software number
- 10SW073978
- Software / calibration
- 6229020900
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Vito |
| Engine | 1.6 diesel 88PS |
| Power | 88PS / 64.7kW |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19 |
| Software number | 10SW073978 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 6510a0d8f51fe1cf |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW073978 | Offset in the file: 0x22001A |
| Software / calibration | 6229020900 | Offset in the file: 0x2B8AF1 |
| Data set number | 6229038400 | Offset in the file: 0x2B8AFC |
| Boot software | 6229040100 | Offset in the file: 0x2B8AE6 |
| Bosch project identifier (EPK) | 47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800/// | Offset in the file: 0x2213A0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19 and software number 10SW073978. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz Vito | 4,096.00 KB | €15 | Add to cart |
All reads of CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-EF-ME19 / 10SW073978
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| CR41-622-51V0-447X-84KW-2ASL4V1-PROCONV-ME8 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-52V0-447X-84KW-PROCONVE-ME11 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-60V1-447X-65KW-EU5-GEN4-JX2-ME11 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-60V1-447X-65KW-EU5-GEN4-JX2-ME11 | 10SW011572 | Mercedes-Benz Vito, Mercedes-Benz VITO111 |
| CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11 | 1037541778 | Mercedes-Benz Vito |
| CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11 | 10SW011579 | Mercedes-Benz Vito |
| CR41-622-60V1-447X-65KW-EU6I-JX2-ME12 | 10SW016882 | Mercedes-Benz Vito |
| CR41-622-60V1-447X-65KW-EU6III-JX2-ME11 | 1037541778 | Mercedes-Benz VITO109 |