Original file

Mercedes-Benz Vito Bosch EDC17C66 CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11 / 1037541778

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11 and software number 1037541778, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vito1.6 diesel 65KW
Control unit
Bosch EDC17C66
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11
Software number
1037541778
Bosch part / software
10SW010220
Software / calibration
6229020900

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Engine1.6 diesel 65KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11
Software number1037541778
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file name380
File keye1f574ef48aab6c7
Identification read from the file
ECU nameEDC17C66
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW010220Offset in the file: 0x02001A
Software / calibration6229020900Offset in the file: 0x02022F
Data set number6229036800Offset in the file: 0x2B8AFC
Boot software6229040100Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800///Offset in the file: 0x040D5C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-60V1-447X-65KW-EU5-GEN6-JX2-ME11 and software number 1037541778. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page