Original file

Mercedes-Benz Vito Bosch EDC17C66 CR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11 / 10SW011584

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11 and software number 10SW011584, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vitodiesel · 84KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11
Software number
10SW011584
Software / calibration
6229020900

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Enginediesel
Displacement1.6
Power84KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11
Software number10SW011584
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key617ba988a47cefc7
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW011584Offset in the file: 0x22001A
Software / calibration6229020900Offset in the file: 0x2B8AF1
Data set number6229037000Offset in the file: 0x2B8AFC
Boot software6229040100Offset in the file: 0x2B8AE6
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800///Offset in the file: 0x2213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11 and software number 10SW011584. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash896.00 KB€15Add to cart

All reads of CR41-622-60V1-447X-84KW-EU5-GEN6-JX2-ME11 / 10SW011584

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page