Original file

Mercedes-Benz Bosch EDC17C66 CR41-622-60V1-447X-84KW-EU6III-JX2-ME12 / 10SW016889

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz, hardware number CR41-622-60V1-447X-84KW-EU6III-JX2-ME12 and software number 10SW016889, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz2.1 diesel 110PS
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR41-622-60V1-447X-84KW-EU6III-JX2-ME12
Software number
10SW016889
Software / calibration
6229020900

Technical data

Vehicle
BrandMercedes-Benz
Engine2.1 diesel 110PS
Power110PS / 80.9kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-60V1-447X-84KW-EU6III-JX2-ME12
Software number10SW016889
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key71b3182557882889
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW016889Offset in the file: 0x02001A
Software / calibration6229020900Offset in the file: 0x0B8AF1
Data set number6229037800Offset in the file: 0x0B8AFC
Boot software6229040100Offset in the file: 0x0B8AE6
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_60V1__CV160800///Offset in the file: 0x0213A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-60V1-447X-84KW-EU6III-JX2-ME12 and software number 10SW016889. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VITO111Flash2,048.00 KB€15Add to cart
Mercedes-Benz VitoFlash896.00 KB€15Add to cart

All reads of CR41-622-60V1-447X-84KW-EU6III-JX2-ME12 / 10SW016889

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
CR41-622-60V1-447X-84KW-EU6I-JX2-ME1210SW016884Mercedes-Benz Vito
CR41-622-60V1-447X-84KW-EU6III-JX2-ME111037541778Mercedes-Benz VITO111, Mercedes-Benz Vito
CR41-622-60V1-447X-84KW-EU6III-JX2-ME1110SW011613Mercedes-Benz Vito
CR41-622-60V1-447X-84KW-EU6III-JX2-ME121037541778Mercedes-Benz Vito, Mercedes-Benz VITO111
CR41-622-66V1-447X-65KW-EU6I-JX2-ME161037541778Mercedes-Benz VITO109
CR41-622-66V1-447X-65KW-EU6I-JX2-ME17_021037541778Mercedes-Benz Vito, Mercedes-Benz VITO109
CR41-622-66V1-447X-65KW-EU6I-JX2-ME17_0210SW052322Mercedes-Benz C180d, Mercedes-Benz Vito
CR41-622-66V1-447X-65KW-EU6III-JX2-ME1610SW041808Mercedes-Benz Vito

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page