Original file

Mercedes-Benz VITO Bosch EDC17C66 CR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02 / 10SW052329

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz VITO, hardware number CR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02 and software number 10SW052329, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz VITOdiesel 88PS
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
CR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02
Software number
10SW052329
Software / calibration
6229021200

Technical data

Vehicle
BrandMercedes-Benz
Car modelVITO
Enginediesel 88PS
Displacement0.8
Power88.0PS / 64.7kW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02
Software number10SW052329
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File keye98f1f64ec0db5ad
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW052329Offset in the file: 0x00001A
Software / calibration6229021200Offset in the file: 0x0993A3
Data set number6229032501Offset in the file: 0x0993AE
Boot software6229040100Offset in the file: 0x099398
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_66V1__CV182500///Offset in the file: 0x0013A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02 and software number 10SW052329. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-BenzFlash896.00 KB€15Add to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart

All reads of CR41-622-66V1-447X-65KW-EU6III-JX2-ME17_02 / 10SW052329

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page