Original file

Mercedes-Benz C180 Bosch EDC17C66 CR41-626-46R0-205WM-85KW-Ch4-EU6SCR_LH-C1_INJ554_KT_AJ_NOxA- / 6269040000

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz C180, hardware number CR41-626-46R0-205WM-85KW-Ch4-EU6SCR_LH-C1_INJ554_KT_AJ_NOxA- and software number 6269040000, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C18085KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
CR41-626-46R0-205WM-85KW-Ch4-EU6SCR_LH-C1_INJ554_KT_AJ_NOxA-
Software number
6269040000
Bosch part / software
10SW009980
Software / calibration
6269020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelC180
Engine85KW
FuelDiesel
Displacement1.6
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41-626-46R0-205WM-85KW-Ch4-EU6SCR_LH-C1_INJ554_KT_AJ_NOxA-
Software number6269040000
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key471268a1da7b1db6
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW009980Offset in the file: 0x00001A
Software / calibration6269020800Offset in the file: 0x099081
Data set number6269038000Offset in the file: 0x09908C
Boot software6269040000Offset in the file: 0x099076
Bosch project identifier (EPK)47/1/EDC17C66/1/P1262//P_1262_46R0__CV160500///Offset in the file: 0x0013A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41-626-46R0-205WM-85KW-Ch4-EU6SCR_LH-C1_INJ554_KT_AJ_NOxA- and software number 6269040000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page