Original file

Mercedes-Benz Vito Bosch EDC17C66 CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0 / 1037555849

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0 and software number 1037555849, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Vitodiesel · 140KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0
Software number
1037555849
Software / calibration
6519021802

Technical data

Vehicle
BrandMercedes-Benz
Car modelVito
Enginediesel
Displacement2.2
Power140KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0
Software number1037555849
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7495d59e86bdf55e
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software1037555849Offset in the file: 0x02001A
Software / calibration6519021802Offset in the file: 0x0850C7
Data set number6519034637Offset in the file: 0x0850D2
Boot software6519041400Offset in the file: 0x0850BC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FGS1__CV150900///Offset in the file: 0x020C80

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0 and software number 1037555849. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz V-KlasseFlash2,048.00 KB€15Add to cart

All reads of CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME0 / 1037555849

Other pairs of Bosch EDC17C66

HardwareSoftwareVehicles
CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME10SW011785Mercedes-Benz Vito, Mercedes-Benz VITO119
CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME10SW022228Mercedes-Benz Vito, Mercedes-Benz V250D, Mercedes-Benz VITO
CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME10SW022230Mercedes-Benz V-Klasse
CR41NFZ-651-FGS1-447A_4X4_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME01037540848Mercedes-Benz Vito, Mercedes-Benz V 250CDI, Mercedes-Benz V-Klasse
CR41NFZ-651-FGS1-447A_LL-100kW-3OSL2S_D-EU5_OP-ME061037540848Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz Viano
CR41NFZ-651-FGS1-447A_LL-100kW-3OSL2S_D-EU5_OP-ME061037555864Mercedes-Benz Vito, Mercedes-Benz V-Klasse
CR41NFZ-651-FGS1-447A_LL-100kW-3OSL2S_D-EU5_OP-ME08008533Mercedes-Benz Vito
CR41NFZ-651-FGS1-447A_LL-100kW-3OSL2S_D-EU5_OP-ME081037540848Mercedes-Benz VITO114, Mercedes-Benz Vito, Mercedes-Benz VITO

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page