Original file
Mercedes-Benz V Bosch EDC17C66 CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 / 6519012802
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz V, hardware number CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 and software number 6519012802, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vdiesel 140KW
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13
- Software number
- 6519012802
- Bosch part / software
- 10SW012291
- Software / calibration
- 6519021802
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | V |
| Engine | diesel 140KW |
| Displacement | 2.1 |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 |
| Software number | 6519012802 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 3c7651969b1c4d42 |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW012291 | Offset in the file: 0x02001A |
| Software / calibration | 6519021802 | Offset in the file: 0x0850C7 |
| Data set number | 6519033948 | Offset in the file: 0x0850D2 |
| Boot software | 6519041400 | Offset in the file: 0x0850BC |
| Bosch project identifier (EPK) | 45/1/EDC17C66/1/P695//P_695_FGS1__CV150900/// | Offset in the file: 0x020C80 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 and software number 6519012802. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 | 012291 | Mercedes-Benz V-classe |
| CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 | 1037533230 | Mercedes-Benz V250 |
| CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 | 1037540848 | Mercedes-Benz Vito, Mercedes-Benz Viano, Mercedes-Benz V250 |
| CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6I_OPS-ME13 | 10SW012291 | Mercedes-Benz V-Klasse, Mercedes-Benz V |
| CR41NFZ-651-FGS1-447A_LL-140kW_OVTQ-3OSL2S_D-EU6_OPS-ME06 | 1037555845 | Mercedes-Benz Viano, Mercedes-Benz V-Klasse |
| CR41NFZ-651-FGS1-447A_RL-100kW-3OSL2S_D-EU6I_OPS-ME07 | 10SW004630 | Mercedes-Benz Vito |
| CR41NFZ-651-FGS1-447A_RL-100kW-3OSL2S_D-EU6I_OPS-ME11 | 10SW011789 | Mercedes-Benz Vito |
| CR41NFZ-651-FGS1-447A_RL-100kW-3OSL2S_D-EU6I_OPS-ME15 | 1037540848 | Mercedes-Benz Vito |