Original file
Mercedes-Benz Vito Bosch EDC17C66 CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 / 033059
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 and software number 033059, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vito2.2 diesel 100KW
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 896.00 KB · Flash
- Hardware number
- CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16
- Software number
- 033059
- Bosch part / software
- 10SW033059
- Software / calibration
- 6519020703
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Vito |
| Engine | 2.2 diesel 100KW |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 |
| Software number | 033059 |
| File type | Original flash read |
|---|---|
| File size | 896.00 KB (917,504 bytes) |
| File key | ba8172486a69c115 |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW033059 | Offset in the file: 0x00001A |
| Software / calibration | 6519020703 | Offset in the file: 0x0693D7 |
| Data set number | 6519038347 | Offset in the file: 0x0693E2 |
| Boot software | 6519041400 | Offset in the file: 0x0693CC |
| Bosch project identifier (EPK) | 45/1/EDC17C66/1/P695//P_695_FKS0__CV172300/// | Offset in the file: 0x001140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 and software number 033059. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| CR41NFZ-651-FHS0-447M_LL-100kW-3OSL2S_D-EU6III_OPS-ME10 | 1037540848 | Mercedes-Benz Vito, Mercedes-Benz VITO109, Mercedes-Benz VITO113 |
| CR41NFZ-651-FHS0-447M_LL-100kW-3OSL2S_D-EU6III_OPS-ME10 | 10SW010203 | Mercedes-Benz VITO111, Mercedes-Benz VITO |
| CR41NFZ-651-FHS0-447M_LL-100kW-3OSL2S_D-EU6III_OPS-ME10 | 10SW010203P695FHS0 | Mercedes-Benz VITO114 |
| CR41NFZ-651-FHS0-447M_LL-120kW-3OSL2S_D-EU6III_OPS-ME10 | 10SW010200 | Mercedes-Benz Vito |
| CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 | 1037540848 | Mercedes-Benz Vito |
| CR41NFZ-651-FKS0-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME16 | 10SW033059 | Mercedes-Benz Vito |
| CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16 | 033060 | Mercedes-Benz V-classe |
| CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16 | 1037540848 | Mercedes-Benz Vito |