Original file
Mercedes-Benz Vito Bosch EDC17C66 CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME18a / 10SW037899
An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz Vito, hardware number CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME18a and software number 10SW037899, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Vito2.1 diesel 136PS
- Control unit
- Bosch EDC17C66
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME18a
- Software number
- 10SW037899
- Software / calibration
- 6519022703
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Vito |
| Engine | 2.1 diesel 136PS |
| Power | 136.0PS / 100.0kW |
| Control unit | Bosch EDC17C66 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME18a |
| Software number | 10SW037899 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | a3a2b6e7a5a0c96e |
| ECU name | EDC17C66 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW037899 | Offset in the file: 0x22001A |
| Software / calibration | 6519022703 | Offset in the file: 0x2893D7 |
| Data set number | 6519036953 | Offset in the file: 0x2893E2 |
| Boot software | 6519041400 | Offset in the file: 0x2893CC |
| Bosch project identifier (EPK) | 45/1/EDC17C66/1/P695//P_695_FKS1__CV180500/// | Offset in the file: 0x221140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME18a and software number 10SW037899. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C66
| Hardware | Software | Vehicles |
|---|---|---|
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME17a | 037890 | Mercedes-Benz Vito |
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME17a | 1037540848 | Mercedes-Benz Vito, Mercedes-Benz V-Klasse |
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME17a | 10SW037890 | Mercedes-Benz VITO114, Mercedes-Benz VITO115 |
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6I_OPS-ME17a | 6519022703 | Mercedes-Benz VITO113 |
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME19 | 1037540848 | Mercedes-Benz Vito |
| CR41NFZ-651-FKS1-447A_4X4_LL-100kW-3OSL2S_D-EU6c_OPS-ME19 | 10SW042162 | Mercedes-Benz V-Klasse |
| CR41NFZ-651-FKS1-447A_4X4_LL-120kW-3OSL2S_D-EU6I_OPS-ME17a | 1037540848 | Mercedes-Benz V, Mercedes-Benz Vito, Mercedes-Benz V-220CDI |
| CR41NFZ-651-FKS1-447A_4X4_LL-120kW-3OSL2S_D-EU6I_OPS-ME17a | 10SW037892 | Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V-Class |