Original file

Jeep Wrangler Bosch EDC17C69 0216681658 / 10SW048952

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Wrangler, hardware number 0216681658 and software number 10SW048952, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.2 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0216681658
Software number
10SW048952
Software / calibration
P_1658_EDC17C69_R064

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.2 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0216681658
Software number10SW048952
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key401dbfa2a5830898
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW048952Offset in the file: 0x20001A
Software / calibrationP_1658_EDC17C69_R064Offset in the file: 0x0202FC
Internal build string11B.11.02.00RBOffset in the file: 0x0127C0
Bosch project identifier (EPK)49/1/EDC17C69/1658/P1658//P_1658_EDC17C69_R064///Offset in the file: 0x0202FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0216681658 and software number 10SW048952. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
00475914031037551229Suzuki
01493614031037551229Suzuki Grand Vitara
01493714031037551229Suzuki Vitara
014937140310SW014937Suzuki Vitara
0281000000Alfa Romeo Giulia, Alfa Romeo Renegad, Chrysler
02810305711037552797Alfa Romeo Giulietta
02810305711037561644Alfa Romeo Giulietta
02810312021037541198Jeep Cherokee, Jeep Grand Cherokee, Jeep Cherokee

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page