Original file

Suzuki SX-4 S-Cross Bosch EDC17C69 0281031203 / 10SW012899

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Suzuki SX-4 S-Cross, hardware number 0281031203 and software number 10SW012899, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Suzuki SX-4 S-Cross1.6 diesel 88KW
Control unit
Bosch EDC17C69
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281031203
Software number
10SW012899
Vehicle maker's hardware number
33920-55P0
Software / calibration
P1403_0S730A0

Technical data

Vehicle
BrandSuzuki
Car modelSX-4 S-Cross
Engine1.6 diesel 88KW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031203
Software number10SW012899
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key44f09ff5a7370d41
Identification read from the file
ECU nameEDC17C69
Read typeCalibration only (data set)
Bosch part / software10SW012899Offset in the file: 0x02001A
Vehicle maker's hardware number33920-55P0Offset in the file: 0x10AF62
Software / calibrationP1403_0S730A0Offset in the file: 0x0202C0
Bosch project identifier (EPK)37/1/EDC17_C69/248///P1403_0S730A0///Offset in the file: 0x0202C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031203 and software number 10SW012899. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312021037561618Jeep Cherokee, Jeep cherokee, Jeep Grand Cherokee
02810312021037561626Jeep Cherokee/Liberty
02810312021037561627Jeep Cherokee
028103120210SW046530Jeep Cherokee
0281031204002871Fiat 500X
0281031204002892Fiat 500
0281031204024407Fiat Egea
0281031204034846Fiat Egea

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page