Original file

Fiat 500X Bosch EDC17C69 0281031204 / 002871

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat 500X, hardware number 0281031204 and software number 002871, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 500X
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031204
Software number
002871
Bosch part / software
10SW002871
Vehicle maker's hardware number
55265162
Software / calibration
P_1619_EDC17C69_G10D_V1

Technical data

Vehicle
BrandFiat
Car model500X
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number002871
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFiat SW version HW 500X
File key055a571b16b49f64
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW002871Offset in the file: 0x02001A
Vehicle maker's hardware number55265162Offset in the file: 0x3D4219
Software / calibrationP_1619_EDC17C69_G10D_V1Offset in the file: 0x1EECC0
Internal build string11B.13.02.00RBOffset in the file: 0x0129F8
Bosch project identifier (EPK)61/1/EDC17C69/1619/P1619_G10D_C69//P_1619_EDC17C69_G10D_V1///Offset in the file: 0x1EECC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 002871. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312021037561626Jeep Cherokee/Liberty
02810312021037561627Jeep Cherokee
028103120210SW046530Jeep Cherokee
028103120310SW012899Suzuki SX-4 S-Cross
0281031204002892Fiat 500
0281031204024407Fiat Egea
0281031204034846Fiat Egea
0281031204038566Fiat Egea

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page