Original file
Jeep Renegade Bosch EDC17C69 0281031204 / 1037541475
An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Renegade, hardware number 0281031204 and software number 1037541475, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jeep Renegade2.0 diesel 120PS
- Control unit
- Bosch EDC17C69
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 0281031204
- Software number
- 1037541475
- Bosch part / software
- 10SW015602
- Vehicle maker's hardware number
- 55265162
- Software / calibration
- P_1618_EDC17C69_G07A_V0
Technical data
| Brand | Jeep |
|---|---|
| Car model | Renegade |
| Engine | 2.0 diesel 120PS |
| Power | 120.0PS / 88.3kW |
| Control unit | Bosch EDC17C69 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281031204 |
| Software number | 1037541475 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 5497dd6750ce1941 |
| ECU name | EDC17C69 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW015602 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | 55265162 | Offset in the file: 0x3EACD8 |
| Software / calibration | P_1618_EDC17C69_G07A_V0 | Offset in the file: 0x1CE6D4 |
| Internal build string | 11B.13.02.00RB | Offset in the file: 0x0129F8 |
| Bosch project identifier (EPK) | 61/1/EDC17C69/1618/P1618_G07A_C69//P_1618_EDC17C69_G07A_V0/// | Offset in the file: 0x1CE6D4 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037541475. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Fiat 500X | 4,096.00 KB | €15 | Add to cart |
| Fiat Tipo | 4,096.00 KB | €15 | Add to cart |
| Fiat 500X | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Fiat 500X | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Fiat Toro 2.0TDI | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
| Jeep Renegade | 4,096.00 KB | €15 | Add to cart |
Other pairs of Bosch EDC17C69
| Hardware | Software | Vehicles |
|---|---|---|
| 0281031204 | 024407 | Fiat Egea |
| 0281031204 | 034846 | Fiat Egea |
| 0281031204 | 038566 | Fiat Egea |
| 0281031204 | 046800 | Fiat 500 |
| 0281031204 | 1037547134 | Jeep Renegade 2.0 MultiJet, Jeep 500, Fiat |
| 0281031204 | 1037549850 | Jeep Renegade |
| 0281031204 | 1037549864 | Jeep Renegade 2.0 MultiJet |
| 0281031204 | 1037550692 | Fiat 500L |