Original file
Fiat 500X Bosch EDC17C69 0281031204 / 1037550694
An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Fiat 500X, hardware number 0281031204 and software number 1037550694, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Fiat 500X2.0 diesel 136PS
- Control unit
- Bosch EDC17C69
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 0281031204
- Software number
- 1037550694
- Vehicle maker's hardware number
- 55265162
- Software / calibration
- P_1264_EDC17C69_G067_V0
Technical data
| Brand | Fiat |
|---|---|
| Car model | 500X |
| Engine | 2.0 diesel 136PS |
| Power | 136.0PS / 100.0kW |
| Control unit | Bosch EDC17C69 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281031204 |
| Software number | 1037550694 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | dfab165ef649241a |
| ECU name | EDC17C69 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 1037550694 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | 55265162 | Offset in the file: 0x3E9430 |
| Software / calibration | P_1264_EDC17C69_G067_V0 | Offset in the file: 0x1CC1A0 |
| Internal build string | 11B.13.02.00RB | Offset in the file: 0x0129F8 |
| Bosch project identifier (EPK) | 61/1/EDC17C69/1264/P1264_G067_C69//P_1264_EDC17C69_G067_V0/// | Offset in the file: 0x1CC1A0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037550694. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C69
| Hardware | Software | Vehicles |
|---|---|---|
| 0281031204 | 1037547134 | Jeep Renegade 2.0 MultiJet, Jeep 500, Fiat |
| 0281031204 | 1037549850 | Jeep Renegade |
| 0281031204 | 1037549864 | Jeep Renegade 2.0 MultiJet |
| 0281031204 | 1037550692 | Fiat 500L |
| 0281031204 | 1037552713 | Jeep Renegade |
| 0281031204 | 1037552725 | Fiat 500, Fiat 500X BR PERFORMANCE |
| 0281031204 | 1037552734 | Fiat 500 |
| 0281031204 | 1037552743 | Fiat 500X |