Original file

Jeep Renegade Bosch EDC17C69 0281031204 / 1037558828

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Renegade, hardware number 0281031204 and software number 1037558828, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Renegade2.0 diesel
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281031204
Software number
1037558828
Vehicle maker's hardware number
55265162
Software / calibration
P_1618_EDC17C69_G06E_V0

Technical data

Vehicle
BrandJeep
Car modelRenegade
Engine2.0 diesel
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number0281031204
Software number1037558828
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameL533CC0
File key045d41a97b071138
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037558828Offset in the file: 0x02001A
Vehicle maker's hardware number55265162Offset in the file: 0x3EACD8
Software / calibrationP_1618_EDC17C69_G06E_V0Offset in the file: 0x1CE5E0
Internal build string11B.13.02.00RBOffset in the file: 0x0129F8
Bosch project identifier (EPK)61/1/EDC17C69/1618/P1618_G06E_C69//P_1618_EDC17C69_G06E_V0///Offset in the file: 0x1CE5E0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281031204 and software number 1037558828. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
02810312041037558153Fiat 500X
02810312041037558160Jeep Renegade
02810312041037558230Jeep Compass, Jeep 500X, Fiat
02810312041037558827Jeep Renegade 2.0 MultiJet
02810312041037559985Jeep Renegade 2.0 MultiJet
02810312041037559986Jeep Renegade
02810312041037560050Fiat Renegade, Fiat Tipo, Fiat Tipo Egea
02810312041037560821Fiat Toro

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page